MIKROFONMIKSER MCLELLAND 3INN 1 UT XLR

The MQS-74 can be use between the mics and the mixer. Each mic channel on the MQS-74. The balanced XLR line output can be connected to a mic input on the mixer and headphones or a powered monitor can be connected to the Phone/ Aux output. And if AC power is not available, the MQS-74 runs on batteries as well as with an AC adaptor (optional).

•3-channel XLR input, single stereo sound converter, balanced XLR output
•Phantom power and low frequency cut-off switch (P: phantom power, L: low frequency cut. P switch down, phantom power up. L switch up, cut low frequency)
•Used in sound reinforcement systems, musical instruments, recording and engineering installations.
•Microphone level: gain from -? to +60dB
•Handset/Aux external plug in: 1/4” TRS headphone jack Signal processor or amplifier for personal monitoring or access to unbalanced inputs
•Clip indicator: When the signal is overloaded below 4dB, the LED indicator will light up.
•Power: 12V DC or 2 x 9V battery
•MQS-74 can be connected to signal processor and amplifier


Specifications

•Input Impedance: 600 Ù
•Output Impedance: 600 Ù
•THD. + Noise: 0.02%
•Max. Output Level: +14dB
•Max. Input Level: -14dB
•Clipping Headroom: 4dB
•Max. Gain: +60dB
•Low Cut: -3dB @ 100Hz
•Current Draw: 20mA
•Phantom Power: 18V DC (Two 9V batteries)
•Power : 12V DC adapter
•Dimension : 143x 93x 45 mm
•Weight: 553g